Quadro

The 4 bar universal cultivator for shallow stubble cultivation and deep soil loosening

  • Concept

    The name Quadro identifies the four bar cultivator series in the Köckerling program. The quality of the straw working and the straw distributionis dependent on the number and distribution of the tines. Basically the more tines the better the work, however the layout of the tines must also produce block free working. The Quadro series is equipped with hydraulic transportwheels, which make road transport, and turning on the headlands fastand reliable. The working depth of the Quadro is between 5 - 30 cm.

  • Equipment

    Standard equipment

    Levelling tines and levelboard

    In front of the double STS roller there are adjustable leveling tines, which level the smaller litter dams again. These levellers are easy to adjust, no maintenance and low cost in the wear behavior. In addition, the machine is equipped with a levelboard in front of the roller.

    Double STS - roller

    As standard, the cultivator Quadro is equipped with a double STS - roller. The double-STS-roller provides high load capacity, and ensures a good soil reconsolidation. During work the open rings fill with soil so that the friction between the soil in the rings and the soil in the field keep the roller turning (Soil to soil).

    Depth guidance

    The huge front depth wheels adjust the depth and the double STS - roller mounted at the rear. This way an even working depth is guaranteed. The front depth wheels are mounted out wide to limit side ways movement.

    Option

    Following harrow 13 mm

    For a good result, the Quadro is equipped  with a following harrow that can be adjusted in its working angel. Ideal even after root crops or on the plow furrow for seedbed preparation.

    Tine options for the Quadro

    TopMix - Goosefoot 320 x 10 mm: For an extremely shallow cultivation.

    TopMix - Point 80 x 14 mm: With wing share 350 x 10 mm for medium deep tillage with an optimum mixing effect.

    TopMix - Subsoiler point 40 x 20 mm:  For an extremely deep loosening.

    BETEK TopMix - Subsoiler point 40 x 20 mm: For an extremely deep loosening and long service life.

    BETEK TopMix - Point 80 x 30 mm:  For a deep loosening and a long service life.

     

     

  • Technical data

    Technical data Quadro

    Quadro 300 Quadro 400 Quadro 460 Quadro 570
    Working width 3,00 m 4,00 m 4,60 m 5,70 m
    Transport width 3,00 m 3,00 m 3,00 m 3,00 m
    Number of tines 11 15 17 21
    Tine spacing 27cm 27 cm 27 cm 27 cm
    Under frame clearance 85 cm 85 cm 85 cm 85 cm
    Weight 3300 kg 5000 kg 5300 kg 5800 kg
    Power requirement 140 HP 170 HP 190 HP 240 HP
    LevellingLevelling tines, Levelboard
    RollerDouble - STS - roller 530 mm
    Following harrow13 mm